Purchasing a pergola is an excellent way to expand and enhance your outdoor area. However, a crucial question often arises beforehand: should the pergola be free-standing or attached to the house wall?
The decision depends on several factors, including the existing infrastructure and personal preferences. In this blog post you will find all the useful information.
Attaching a pergola to the house wall vs. using a stud frame
Choosing between wall mounting and stud mounting for your pergola depends on a number of factors. For example, the proximity of your patio to the house or the type of masonry may play a role. At Sky Pergola, we are proud to offer solutions for both scenarios.
Technical term: stud frame
A stud frame is a frame construction made of load-bearing posts and cross beams for reinforcement. It is particularly suitable for free-standing pergolas that are firmly anchored in the ground.
Expert tip:
If your facade is equipped with a modern external thermal insulation composite system (ETICS), a freestanding pergola is often the better choice. If mounted on a wall, the insulation could be damaged and the insulating effect of the insulated facade could be impaired.
Attachment to the house wall – the advantages
If you decide to install a pergola on the house wall, there are numerous advantages. With Sky Pergola products in particular, you can benefit from improved statics, as the house wall additionally stabilizes the pergola.
Another big plus point is the additional protection from the sun and the weather. Neither an approaching rain shower nor a strong wind can harm your relaxation outdoors. You are always sitting in the dry. This transition from the living room to the terrace becomes a pleasant experience thanks to our pergolas.
Mounting a pergola on a facade – step-by-step instructions
Correctly attaching the pergola to the house wall is crucial to avoid long-term damage.
This is how you mounted your pergola on your facade step by step:
Step 1: Obtain suitable materials
The wall beam that is connected to the wall must be installed in a waterproof manner. This is the only way to prevent moisture from penetrating the masonry.
To seal the gap, you should first get sealing tape (compression tape). You then place this between the roof beams and the wall. It is also advisable to seal the top and bottom edges between the roof beams and the wall with suitable silicone. It is best to buy silicone that is suitable for outdoor use.
Step 2: Marking the mounting height
It is important to work very carefully to ensure that the height is the same at all points where the wall brackets are attached.
Step 3: Plan lighting for the pergola
At this point you should think about how you want to light your pergola in the future. Is the lighting built into the pergola or do you have to install the lighting yourself?
Both options usually require a power supply, so it is advisable to consider the route of the power cables. You may be able to hide the cables discreetly using cable ducts.
Step 4: Fixing the wall beams
Fasten the wall beam according to the enclosed instructions. Make sure that the distances between the wall brackets are correct to ensure uniform statics. You can find the instructions for our pergolas here .
Step 5: Setting the silicone joint
Apply a silicone sealant once the wall beam is firmly in place. Careful sealing with silicone is essential to prevent costly damage later on. Nobody wants moisture or water leaks that can be a real drain on their wallet.
Install it yourself or hire a professional?
Installing a pergola on the wall of your house can be a challenge, so it's worth asking: is it a job for professionals only, or can DIYers also tackle the task? At Sky Pergola, we believe that calling in a professional is essential to avoid mistakes and ensure the best possible installation.
If you have the slightest doubt about your ability to install, invest in a professional. This will save you time, effort and potential costs for repairs and maintenance in the long run. Take a look at the overview of our installation service .
permit and insurance
Before you begin installing your pergola on your house wall, it is important to find out about any permits and insurance conditions that may be required. Different regions and municipalities may have different building regulations. At Sky Pergola, we always strive to support and advise our customers on these issues .
Why choose Sky Pergola
Deciding to install a pergola on your house wall is a big step towards improving your outdoor space. Choosing the right supplier and product can make all the difference.
At Sky Pergola we offer a wide range of pergolas and accessories that impress with both their design and functionality. Our assembly service ensures that your pergola is installed correctly and safely for many years of use.
